Dominator® 4861 Disc Ripper

Dominator 4861 sil.png

Maximum Productivity

The Dominator 4861 was developed with 24" shank spacing to promote subsoil maintenance, while providing increased working widths and operator productivity. RTK working widths range from 14’ to 26’.

Contact your dealer for pricing

Find a dealer near you

The KUHN Krause Dominator® combination primary tillage machine sets new standards for residue management, compaction removal and mixing of residue in one pass. The Dominator 4861 offers a subsoil primary tillage solution that provides optimal tilled width productivity. A 24” subsoil shank spacing provides RTK cut widths of 14’ (7 shank), 18’ (9 shank), 22’ (11 shank) and 26’ (13 shank) allowing you to cover more acres per day.
4861_Action06.jpg

Your benefits

Residue Management

Dominator4860_CoulterGang.png

Coulters

Adjustable, hydraulic constant-flow 25” diameter coulters, with 8” spacing, are indexed to each sub-soil shank maintaining a uniform cutting pressure across varying soil and heavy residue. A new heavy-duty scraper bar weldment prevents residue and wet soil from building between coulter blades. Coulters are indexed so a single blade is operating on each side of the subsoil shank. Increase the coulter hydraulic down pressure for a blacker, rougher field finish or decrease coulter down pressure for a smaller clod size with an extremely level field finish. Coulter gangs are mounted with Rock-Flex™ bearing arms for added protection. Coulters feature PEER® TILLXTREME™ maintenance-free bearings.

Shank Spacing

Subsoil shanks on 24” spacing provide optimum cut widths for available horsepower per foot of cut. This double-rank design allows for a minimum of 48” between adjoining shanks for maximum “no-plug” residue and soil flow.
4861 Shank Spacing.jpg

Fracture

Dominator_DoubleKShank.png

Shanks

Compaction reduction and subsoil maintenance are accomplished through 3,000-pound point load, auto-reset subsoil shanks. Shanks are equipped with Double K™ ripper points and offer a maximum operating depth of 16 inches.

Double K™ Points

Double K ripper points double the wear life of prior KUHN Krause Dominator fabricated steel and carbide-capped ripper points. Solid casting increases durability in rocky conditions. Choose between the 26.5-pound, 7” wing ripper point and the 22-pound, 2.5” straight ripper point.
DoubleK_Dominator.png

Rear Disc Conditioner

4861 Rear Disc Conditioner.jpg

Rear Disc Conditioner

Left and right sections of the rear disc conditioner are configured in a reverse tandem design that first moves soil inward, then outward in opposite directions, to aggressively mix and bury residue, size large clods and level the soil. The disc conditioner is hydraulically controlled with a lower limit adjustment valve. Uniform 12” spacing is maintained with individually mounted, 24” fluted, shallow concavity blades. Disc conditioner blade configuration offers a level field finish while functioning within a wide range of operating speeds. A specially designed C-arm now allows for the disc hub to be directly mounted. This new combination of C-arm and hub provides 10% more soil and residue flow through the disc conditioner to improve continuous operation in adverse conditions. Dual hydraulic cylinders control the position of the rear disc conditioner for optimal operating height in relation to the tilled soil surface.

Heavy-Duty 24/7® Conditioning Reel

Choice of heavy-duty solid round bar or heavy-duty flat bar reel with PEER® TILLXTREME™ maintenance-free bearing assemblies mounted on heavy-duty ductile cast bearing arms provides aggressive clod sizing and soil firming. Hydraulic control for reel lift is standard.
4861 247 Action.jpg

Maintenance-Free Bearing Assembly

Independently mounted blades on a 6-bolt hub containing double angular contact bearing equipped with 11-lip seals offer outstanding reliability and maintenance free operation.
Dominator Blade and Bearing.jpg

Equipment

4861_Action01.jpg

Specifications

SPECIFICATIONS
 
Transport Width
Transport Height
Frame Type
Number of Shanks
Shank Spacing
Coulter Blade Spacing
Working Width
Shipping Weight Less Reel Option
Shipping Weight With Reel Option
DOMINATOR 4861-7 DOMINATOR 4861-9 DOMINATOR 4861-9F DOMINATOR 4861-11 DOMINATOR 4861-13
16'1" (4.9 m) 18'7" (5.7 m) 15'6" (4.7 m) 17'9" (5.4 m) 17'9" (5.4 m)
8' (2.4 m) 11'6" (3.5 m) 11'6" (3.5 m) 12'2" (3.7 m) 13'6" (4.1 m)
Rigid Rigid Folding Folding 3-Section Folding 3-Section
7 9 9 11 13
24" (61 cm) 24" (61 cm) 24" (61 cm) 24" (61 cm) 24" (61 cm)
8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm) 8" (20.3 cm)
14' (4.3 m) 18' (5.5 m) 18' (5.5 m) 22' (6.7 m) 26' (7.9 m)
16,915 lb (7 672 kg) 20,700 lb (9 389 kg) 21,516 lb (9 759 kg) 28,394 lb (12 879 kg) 31,104 lb (14 108 kg)
18,207 lb (8 258 kg) 22,400 lb (10 160 kg) 23,189  lb (10 518 kg) 30,177 lb (13 688 kg) 33,321 lb (15 109 kg)
STANDARD EQUIPMENT
 
Hitch Type
Tongue Type
Depth Control
Hydraulics
Coulter Blades
Coulter Gangs
Shanks
Points
Main Frame Wheels
Wing Frame Wheels
Hydraulic Controlled Rear Disc Conditioner
Rear Conditioning Reel
Hydraulic Controlled Conditioning Reel
Transport Locks and Safety
DOMINATOR 4861-7 DOMINATOR 4861-9 DOMINATOR 4861-9F DOMINATOR 4861-11 DOMINATOR 4861-13
CAT IV Articulating Ball Hitch for 2" Pin CAT IV Articulating Ball Hitch for 2" Pin CAT IV Articulating Ball Hitch for 2" Pin CAT IV Articulating Ball Hitch for 2" Pin CAT IV Articulating Ball Hitch for 2" Pin
Rigid, Mechanical Adjustable, Self-Leveling Tongue Rigid, Mechanical Adjustable, Self-Leveling Tongue Rigid, Mechanical Adjustable, Self-Leveling Tongue Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue)
Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control
Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses
25" x ¼" Smooth 25" x ¼" Smooth 25" x ¼" Smooth 25" x ¼" Smooth 25" x ¼" Smooth
8" Spacing, Adjustable Constant Pressure Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-¾" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼" x 2-½" 8" Spacing, Adjustable Constant Pressure Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-¾" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼" x 2-½" 8" Spacing, Adjustable Constant Pressure Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-¾" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼" x 2-½" 8" Spacing, Adjustable Constant Pressure Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-¾" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼" x 2-½" 8" Spacing, Adjustable Constant Pressure Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-¾" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex™ Bearing Arms 1-¼" x 2-½"
3,000 lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼ x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance, 16" Working Depth 3,000 lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼ x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance, 16" Working Depth 3,000 lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼ x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance, 16" Working Depth 3,000 lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼ x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance, 16" Working Depth 3,000 lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-¼ x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance, 16" Working Depth
Double K® Chromium Carbide, 7" Winged Ripper Points Double K® Chromium Carbide, 7" Winged Ripper Points Double K® Chromium Carbide, 7" Winged Ripper Points Double K® Chromium Carbide, 7" Winged Ripper Points Double K® Chromium Carbide, 7" Winged Ripper Points
(4) 360/65R17.5 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs (4) 360/65R17.5 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs (4) 360/65R17.5 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs (4) 440/55R18 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs (4) 440/55R18 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy-Duty Hubs
Not Applicable Not Applicable Not Applicable (1) 360/65R17.5 per Wing 8-Bolt Hub (1) 360/65R17.5 per Wing 8-Bolt Hub
Maintenance-Free, Double Angular Contact Bearing, 6-Bolt Hub for Blades 24" x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12" Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design Maintenance-Free, Double Angular Contact Bearing, 6-Bolt Hub for Blades 24" x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12" Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design Maintenance-Free, Double Angular Contact Bearing, 6-Bolt Hub for Blades 24" x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12" Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design Maintenance-Free, Double Angular Contact Bearing, 6-Bolt Hub for Blades 24" x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12" Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design Maintenance-Free, Double Angular Contact Bearing, 6-Bolt Hub for Blades 24" x 6 Gauge, Fluted Shallow Concavity Disc Blades, 12" Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design
24/7® Soil Conditioning Reel, Heavy-Duty Solid Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning Reel, Heavy-Duty Solid Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning Reel, Heavy-Duty Solid Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning Reel, Heavy-Duty Solid Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning Reel, Heavy-Duty Solid Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings
(1) 2" x 3.25" Cylinder and Hoses per Carrier Arm (1) 2" x 3.25" Cylinder and Hoses per Carrier Arm (1) 2" x 3.25" Cylinder and Hoses per Carrier Arm (1) 2" x 3.25" Cylinder and Hoses per Carrier Arm (1) 2" x 3.25" Cylinder and Hoses per Carrier Arm
Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High-Visibility LED Lighting
OPTIONAL EQUIPMENT
 
Hitch Type
Tongue Type
Points
Rear Conditioning Reel
Rear Conditioning Reel
Hydraulic Controlled Conditioning Reel
Smart Soil Technology
ISOBUS Terminal
ISOBUS Tractor Harness (ITH)
GPS Speed Sensor
Third Party GPS Harness
DOMINATOR 4861-7 DOMINATOR 4861-9 DOMINATOR 4861-9F DOMINATOR 4861-11 DOMINATOR 4861-13
CAT III Articulating Ball Hitch for 1-½" Pin CAT III Articulating Ball Hitch for 1-½" Pin CAT III Articulating Ball Hitch for 1-1/2" Pin CAT V Articulating Ball Hitch for 2-3/4" Pin CAT V Articulating Ball Hitch for 2-3/4" Pin
Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Mechanical Adjustable, Self-Leveling Tongue Mechanical Adjustable, Self-Leveling Tongue
Double K® 2-½" Cast Chromium Carbide, Straight Ripper Point Double K® 2-½" Cast Chromium Carbide, Straight Ripper Point Double K® 2-½" Cast Chromium Carbide, Straight Ripper Point Double K® 2-½" Cast Chromium Carbide, Straight Ripper Point Double K® 2-½" Cast Chromium Carbide, Straight Ripper Point
None None None None None
24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings
None None None None None
In Cab ISOBUS Control of Depth, Coulter Pressure, Disc Conditioner Depth and Conditioner Reel List. Machines Equipped with Smart Soil Technology® Require Total 2 Tractor SCVs. Smart Soil Technology® Requires Max 4 GPM Oil Flow from Tractor. Requires 1 Free Flow Return to Tractor Reservoir (I.E. Motor Return). In Cab ISOBUS Control of Depth, Coulter Pressure, Disc Conditioner Depth and Conditioner Reel List. Machines Equipped with Smart Soil Technology® Require Total 2 Tractor SCVs. Smart Soil Technology® Requires Max 4 GPM Oil Flow from Tractor. Requires 1 Free Flow Return to Tractor Reservoir (I.E. Motor Return). In Cab ISOBUS Control of Depth, Coulter Pressure, Disc Conditioner Depth and Conditioner Reel List. Machines Equipped with Smart Soil Technology® Require Total 2 Tractor SCVs. Smart Soil Technology® Requires Max 4 GPM Oil Flow from Tractor. Requires 1 Free Flow Return to Tractor Reservoir (I.E. Motor Return). In Cab ISOBUS Control of Depth, Coulter Pressure, Disc Conditioner Depth and Conditioner Reel List. Machines Equipped with Smart Soil Technology® Require Total 2 Tractor SCVs. Smart Soil Technology® Requires Max 4 GPM Oil Flow from Tractor. Requires 1 Free Flow Return to Tractor Reservoir (I.E. Motor Return). In Cab ISOBUS Control of Depth, Coulter Pressure, Disc Conditioner Depth and Conditioner Reel List. Machines Equipped with Smart Soil Technology® Require Total 2 Tractor SCVs. Smart Soil Technology® Requires Max 4 GPM Oil Flow from Tractor. Requires 1 Free Flow Return to Tractor Reservoir (I.E. Motor Return).
CCI 800 or CCI 1200 Available as Option for Machines Equipped with Smart Soil Technology®. Only Required if Customer Does Not Have Own Compatible ISOBUS Display, or Where Customer Wishes to Have A Second ISOBUS Display In Cab. CCI 800 or CCI 1200 Available as Option for Machines Equipped with Smart Soil Technology®. Only Required if Customer Does Not Have Own Compatible ISOBUS Display, or Where Customer Wishes to Have A Second ISOBUS Display In Cab. CCI 800 or CCI 1200 Available as Option for Machines Equipped with Smart Soil Technology®. Only Required if Customer Does Not Have Own Compatible ISOBUS Display, or Where Customer Wishes to Have A Second ISOBUS Display In Cab. CCI 800 or CCI 1200 Available as Option for Machines Equipped with Smart Soil Technology®. Only Required if Customer Does Not Have Own Compatible ISOBUS Display, or Where Customer Wishes to Have A Second ISOBUS Display In Cab. CCI 800 or CCI 1200 Available as Option for Machines Equipped with Smart Soil Technology®. Only Required if Customer Does Not Have Own Compatible ISOBUS Display, or Where Customer Wishes to Have A Second ISOBUS Display In Cab.
ISOBUS Tractor Harness Available as Option for Machines Equipped with Smart Soil Technology®. Only Required for Use with Non-ISOBUS Tractors. ISOBUS Tractor Harness Available as Option for Machines Equipped with Smart Soil Technology®. Only Required for Use with Non-ISOBUS Tractors. ISOBUS Tractor Harness Available as Option for Machines Equipped with Smart Soil Technology®. Only Required for Use with Non-ISOBUS Tractors. ISOBUS Tractor Harness Available as Option for Machines Equipped with Smart Soil Technology®. Only Required for Use with Non-ISOBUS Tractors. ISOBUS Tractor Harness Available as Option for Machines Equipped with Smart Soil Technology®. Only Required for Use with Non-ISOBUS Tractors.
GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where No Other ISOBUS Compatible Speed Source is Available. GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where No Other ISOBUS Compatible Speed Source is Available. GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where No Other ISOBUS Compatible Speed Source is Available. GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where No Other ISOBUS Compatible Speed Source is Available. GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where No Other ISOBUS Compatible Speed Source is Available.
GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where A Third Party GPS Unit Needs to Be Connected to the KUHN ITH Harness. Note: Additional Cables May Be Required From the GPS Manufacturer. GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where A Third Party GPS Unit Needs to Be Connected to the KUHN ITH Harness. Note: Additional Cables May Be Required From the GPS Manufacturer. GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where A Third Party GPS Unit Needs to Be Connected to the KUHN ITH Harness. Note: Additional Cables May Be Required From the GPS Manufacturer. GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where A Third Party GPS Unit Needs to Be Connected to the KUHN ITH Harness. Note: Additional Cables May Be Required From the GPS Manufacturer. GPS Speed Sensor Available as Option When ITH Harness is Selected. Only Required for Non-ISOBUS Tractors Where A Third Party GPS Unit Needs to Be Connected to the KUHN ITH Harness. Note: Additional Cables May Be Required From the GPS Manufacturer.
OPERATING INFORMATION
 
Recommended Tractor Power
Working Depth Range
Recommended Operating Speed
DOMINATOR 4861-7 DOMINATOR 4861-9 DOMINATOR 4861-9F DOMINATOR 4861-11 DOMINATOR 4861-13
40 - 50 ENG HP/shank (29 - 37 kW/shank) 40 - 50 ENG HP/shank (29 - 37 kW/shank) 40 - 50 ENG HP/shank (29 - 37 kW/shank) 40 - 50 ENG HP/shank (29 - 37 kW/shank) 40 - 50 ENG HP/shank (29 - 37 kW/shank)
8" - 16" (20.3 - 40.6 cm) 8" - 16" (20.3 - 40.6 cm) 8" - 16" (20.3 - 40.6 cm) 8" - 16" (20.3 - 40.6 cm) 8" - 16" (20.3 - 40.6 cm)
4 - 7 mph (6 -11 km/h) 4 - 7 mph (6 -11 km/h) 4 - 7 mph (6 -11 km/h) 4 - 7 mph (6 -11 km/h) 4 - 7 mph (6 -11 km/h)

Media

4861_Action01.jpg
4861_Action02.jpg
4861_Action03.jpg
More