KUHN HRB 103 Series Power Harrows – Designed to Cut Your Costs

Designed to Cut Your Costs

The HRB 103 Series power harrows feature a dependable gearbox, heavy-duty frame construction, all gear drive and forged tines.

Contact your dealer for pricing

Find a dealer near you

Download the Literature

Benefits
Equipment
Specifications
Media

KUHN HRB 103 Series power harrows are designed for farming operations that require intensive annual use in moderate to heavy soils. These rigid power harrows are designed to complement the most commonly sold tractor sizes with horsepower ratings of 60 to 160 horsepower. These harrows perform very well for producers in crops where proper seedbed preparation is essential.

Superior Soil Preparation

Orientation of the Blade Holders

KUHN power harrow blade holders are positioned to provide a progressive crumbling of the soil by the blades. This precise and exclusive layout prevents the harrow from excessive vibrations while at the same time reducing the power consumption.

Depth Control

Roller height is easily adjusted with a simple to use multi-hole and stop-pin selector. The HRB 103 Series comes with a large choice of rollers to meet your depth control needs.

Roller Options

KUHN has a wide variety of rollers available to compliment your KUHN power harrow.

For dry, non-sticky soils without an integrated seed drill, the MaxiCrumbler is the roller for you. This roller has a large diameter to reduce risk of soil accumulation and is more durable in rocky conditions.
For compacted, silty or sticky soils, the Packer roller is ideal. The Packer roller is the optimum seedbed preparation tool thanks to the rollers’ crumbling and packing effects.
For light and silty soils, use the MaxiPacker roller. It is less resistant to rolling and requires less horsepower from your tractor.

Durable Drive Components

Rotor Drive

Rotors are driven by large-diameter gears. Power transmission to the blades is ensured by numerous teeth fully engaged at all times. The rotor drive design has contributed to build the highly reliable reputation of KUHN power harrows, the result of more than 30 years of experience and success.

Gearboxes for Every Condition

The aim of seedbed preparation is a fine, structured and leveled seedbed for uniform plant development in one pass to save costs. But working conditions are as varied as soils are. In general, the soil should be worked as intensively as necessary, but as little as possible. It’s important for you to have a well-made gearbox to thoroughly match your operation’s working conditions.

Duplex Gearbox

All large KUHN power harrows, like the HRB 103 Series machines, are equipped with Duplex gearboxes. Their gears can be inverted, offering two rotor speeds to change the soil mixing intensity. Additional gearsets are optional for an even wider range of rotor speeds.

Built Tough

Quick Release Blade System

The HR 103 Series power harrows come standard with the Fast-Fit®, quick release blade system. A full set of blades is easily replaced within minutes saving you time and money.

Hitch Design

The front of the hitch is a heavy-duty rectangular section tube. The lower and top hitch links are made from heavy-duty, high-strength steel. On the HRB 403, the headstock is connected to the gear case by a large base and completed with two stiffening arms.

Equipment

Rear Hydraulic Linkages

Larger models can be equipped with a high-capacity linkage, which lifts up to 7,275 pounds. Cylinders and hinge pins are reinforced and come standard with a hydraulic lift limiter. This linkage is recommended for hitching to KUHN Premia seed drills.

Specifications

SPECIFICATIONS


Transport width
Maximum PTO power
Minimum PTO power
Central gearbox
PTO shaft
Rear PTO output shaft
Number of rotors
Working Depth Range (in/cm)
Hitch
Approximate machine weight with MaxiCrumbler roller
Working width

HRB 303 D	HRB 353 DN	HRB 403 D
10'1" (3.1 m)	11'6" (3.5 m)	13'6" (4.1 m)
100 hp (75 kW) @ 540 rpm; 160 hp (119 kw) @ 1,000 rpm	100 hp (75 kW) @ 540 rpm; 160 hp (119 kW) @ 1,000 rpm	100 hp (75 kW) @ 540 rpm; 160 hp (119 kw) @ 1,000 rpm
60 hp (45 kW)	70 hp (52 kW)	80 hp (60 kW)
Duplex multi-speed	Duplex multi-speed	Duplex multi-speed
1 3/8’’ - 21-spline (factory set for 1,000 rpm)	1 3/8’’ - 21-spline (factory set for 1,000 rpm)	1 3/8’’ - 21-spline (factory set for 1,000 rpm)
Standard	Standard	Standard
10	12	13
8" (20 cm)	8" (20 cm)	8" (20 cm)
Cat. 2 and 3	Cat. 2 and 3	Cat. 2 and 3
2,392 lbs (1,085 kg)	2,844 lbs (1,290 kg)	3,042 lbs (1,380 kg)
9'10" (3.0 m)	11'3" (3.4 m)	13'1" (4.0 m)

Media

View the gallery in full screen

Video ErMz7BLajZE