EL 122/162 - Designed for Long Life and Simple Operation

Designed for Long Life and Simple Operation

KUHN EL 122 and EL 162 power tillers are intended for tractors rated up to 125 horsepower and 165 horsepower. These tillers are designed for convenient operation, with extremely quick and easy to perform adjustments.

Contact your dealer for pricing

Find a dealer near you

Download the Literature

Benefits
Equipment
Specifications
Media

KUHN EL 122 and EL 162 power tillers perform exceptionally well for producers with crop applications where seedbed preparation is essential. As with all KUHN implements intended for soil preparation, these power tillers feature a particularly sturdy design. KUHN EL 122 and 162 power tillers feature dependable gearboxes with reinforced drivelines, heavy-duty frame construction, larger diameter rotors, new hood profile and double articulated rear hood for improved tilling action.

A Rotor to Match Your Cultivation Method

CultiRotor (C-Blade)

The C-blade is equipped with curved blades efficient at mixing while producing a uniform finish. The six blades per flange offer good soil engagement. The blades are attached to the rotor using counter flanges for increased durability in hard and rocky soil.

CultiPlow

The high density and trailing blade position of the CultiPlow rotor maximizes the crumbling and reduction of soil clods while limiting the risks of clogging the rotor. The left and right angles of the blades provide good soil leveling by moving soil side-to-side.

CultiTiller

The leading tine position of the CultiTiller rotor lifts and cuts. Alternately left and right angled tines provide good soil leveling by moving soil side to side. With 40% more free blades than the CultiPlow, the CultiTiller rotor provides superior performance in diversified conditions such as wet, sticky soils, higher residue, and trash conditions.

Withstands the Most Demanding Applications

Hitch Frame

A strong build makes the hitch frame very resistant to wear and shocks. The multiple position and telescopic coupling points adapt well to various tractors.

Solid Box Frame

The heavy-gauge box section crossmember acts as a one-piece frame. This offers improved rigidity, even in the most difficult positions. In rocky conditions, the machine’s outer appearance is protected due to the double-skin hood.

Adjustable Two-Piece Rear Hood

The EL 122 and 162 Series power tillers come with an articulated, curved rear hood that can be easily adjusted by hand cranks. This convenient adjustment allows you to be able to recirculate the soil and crop residues to regulate the soil flow and improve seedbed leveling.

Flexibility to Match Different Soil Conditions

Duplex Gearbox

Designed for heavy-duty applications, the gearbox is capable of handling powerful tractors. Thanks to the invertible gear sets, the rotor speed can be quickly adapted to obtain the required result: an adequate crumbling whatever the soil type is, light or hard. Additional gearsets are available for an even wider range of rotor speeds.

Rotor Drive

The power is transmitted to the large-diameter rotor through an all-gear drive. Gears are made from case-hardened steel and run in an oil bath for extremely long service life. The rotor drive seal utilizes the most advanced sealing method available, a two-piece metallic face seal, for superior performance in difficult service applications.

Equipment

Depth and Roller Adjustment

When fitted with a roller, depth adjustment is easily performed using pins inserted into a multi-hole quadrant. The roller is free to drop, maintaining maximum contact with the soil in any condition. This optimizes firming of the seedbed and helps level the cultivated surface.

Skids or Front Wheels

These wheels are intended for work not requiring the surface to be entirely uniform. The front wheels have adjustable spacing and will roll over firm soil without leaving tracks in the worked soil.

Specifications

SPECIFICATIONS


Available Rotors
Maximum PTO power
Minimum PTO power
Central gearbox
PTO shaft
Rear PTO output shaft
PTO protection
Rotor drive
PTO speed
Rotor speed
Rotor diameter
Number of blades with CultiRotor rotor
Number of flanges
Number of blades per flange
Number of blades
Maximum working depth
Depth control
Working depth adjustment
Rear hood adjustable
Hitch
Working position
Depth wheels
Road lights and signaling
Transport width
Working width
Approximate machine weight

EL 122-250	EL 122-300	EL 162-250	EL 162-300
Cultirotor/Cultiplow/Cultitiller	Cultirotor/Cultiplow/Cultitiller	Cultirotor/Cultiplow/Cultitiller	Cultirotor/Cultiplow/Cultitiller
125 hp (93 kW)	125 hp (93 kW)	165 hp (123 kW)	165 hp (123 kW)
65 hp (48 kW)	75 hp (55 kW)	90 hp (66 kW)	100 hp (73 kW)
Two-speed with two gearsets	Two-speed with two gearsets	Two-speed with two gearsets	Two-speed with two gearsets
1 3/8'' - 21-spline	1 3/8'' - 21-spline	1 3/8'' - 21-spline	1 3/8'' - 21-spline
Standard	Standard	Standard	Standard
Slip clutch	Slip clutch	Slip clutch	Slip clutch
Forged steel gears	Forged steel gears	Forged steel gears	Forged steel gears
1,000 rpm (540 optional)	1,000 rpm (540 optional)	1,000 rpm (540 optional)	1,000 rpm (540 optional)
258/361 & 218 rpm at 1,000 PTO rpm	258/361 & 218 rpm at 1,000 PTO rpm	202/361 & 236/296 rpm at 1,000 PTO rpm	202/361 & 236/296 rpm at 1,000 PTO rpm
21" (53 cm)	21" (53 cm)	22"/23"/23" (55/57/57 cm)	22"/23"/23" (55/57/57 cm)
		10	12
10	12	6	6
6	6
60/84/56	72/100/66	60/56/84	72/100/66
9" (23 cm)	9" (23 cm)	10" (25.5 cm)	10" (25.5 cm)
Depth wheels	Depth wheels	Rear roller	Rear roller
Manual	Manual	Manual	Manual
Crank handle	Crank handle	Crank handle	Crank handle
Cat. 2	Cat. 2	Cat. 2	Cat. 2
Rigid	Rigid	Rigid	Rigid
Standard	Standard	Optional	Optional
Standard - reflectors only	Standard - reflectors only	Standard - reflectors only	Standard - reflectors only
9'1" (2.8 m)	10'8" (3.3 m)	9'1" (2.8 m)	10'9" (3.3 m)
8'2" (2.5 m)	9'10" (3.0 m)	8'2" (2.5 m)	9'10" (3 m)
2,009 - 3,124 lbs (911 - 1,417 kg)	2,376-3,978 lbs (1,080-1,804 kg)	2,290-3,483 lbs (1,041-1,583 kg)	2,662 - 4,351 lb (1,210 - 1,974 kg)