KUHN SR 800 Series SpeedRake® Wheel Rakes

Fits Any Type of Operation

Available in 17- and 19-wheel configurations, the SR 800 Series SpeedRake^® wheel rakes feature working widths ranging from 27’ to 29’6”

Contact your dealer for pricing

Find a dealer near you

Download the Literature

Benefits
Equipment
Specifications
Media
Mobile app

KUHN SR 800 Series SpeedRake^® wheel rakes are the latest to join KUHN's highly trusted rake lineup. All of the wheels on the SR 800 are angled vertically at 8.7°, allowing the crop to be lifted off the ground and transitioned easily from wheel to wheel for a well-formed, uniform and fluffy windrow. With the easily expandable design, the rake beam can increase from 17 to 19 rake wheels, thus increasing working widths from 27' to 29' 6". The simple folding design of the SR 800 allows the operator to extend the frame and angle the rake beam to match up with a variety of mower widths and windrow styles to fit any type of operation. The ground pressure on the rake wheels can be easily adjusted on each beam to get the best crop pickup for a clean looking field.

Heavy-Duty Design

Heavy-Duty Frame

The frame of the SR 800 Series wheel rakes is built with heavy-duty components to ensure a long service life when running in rough field conditions and heavy use. The overhead frame can be extended out to match with any mower size and windrow width.

60” Rake Wheels

The 60” rake wheels are built from heavy-duty steel to ensure a long service life. Windguards and rubber tines ensure a smooth crop flow and uniform windrow. The rubber tines are flexible, yet tough enough to pick up long or wet crop, without incorporating an excessive amount of dirt or ash into the windrow.

Tandem Axles

Tandem axles provide improved performance in difficult field and crop conditions. The machine will float better over pivot tracks and through waterways or ditches.

Gentle, Clean Raking

Rake Wheel Angle

All of the rake wheels are angled 8.7 degrees allowing the crop to be lifted off of the ground and flow easily from wheel to wheel to create a uniform, fluffy windrow.

Windrow Formation Rake Wheel

This rake wheel is added to the farthest back position on the rake wheel arm. The purpose of this extra wheel is to kick up the final portion of the windrow and throw the crop back on top of the windrow. This will produce an even, fluffy windrow that allows air to pass through and dry the windrow consistently allowing the crop to feed evenly into a round or square baler or forage harvester.

Rake Wheel Suspension

Individually floating rake wheels are mounted on spring-suspended arms and can be adjusted on each side. This reduces soil disturbance, providing cleaner raking and resulting in higher quality hay.

Rake Wheel Ground Pressure Adjustment

This single-point, adjustable, toolless stop on the right and left sides increases or decreases the machine’s ground pressure. It also puts the operator in control to adjust the ground pressure based on crop volume and conditions to incorporate less dirt and ash into the windrow.

Easily Meet Your Operation’s Needs

Manually Adjustable Configuration

The manually adjustable configuration requires 2 DA hydraulic valves from the tractor. The first hydraulic valve will extend and retract the overhead frame. The second hydraulic valve will raise and lower the rake wheels.

Hydraulically Adjustable Configuration

The optional hydraulic configuration requires 3 DA hydraulic valves. The first two hydraulic valves do the same thing as the manual configuration. The third hydraulic valve will change the rake wheel beam angle to get the desire working width and windrow width.

Electric Control Configuration

With only one hydraulic valve, users are able to fold and unfold the rake, raise and lower the rake wheels, and adjust the beam angle to get the desired working width while never having to leave the comfort of the tractor.

Equipment

Adjustable Clevis or Ball Hitch

A clevis hitch comes standard with all models. A ball hitch is optional.

Specifications

SPECIFICATIONS


Minimum working width
Maximum working width
Number of rake wheels
Rake wheel bearings
Center kicker wheel
Rake wheel diameter
Tine diameter
Tine sets per wheel
Rake wheel mounting
Rake wheel lift
Rake wheel ground pressure
Safety chain
Transport wheels and tires
Tread width
Single axle
Tandem axle
Minimum windrow width
Maximum windrow width
Transport width
Transport length
Transport height
Rake wheel clearance on headlands
Single-side raking
Intermediate caster wheel set
Windguards
Minimum power requirement
Required tractor hydraulic connections
Hitch
Machine weight approx.
Rake wheel and frame extension kit
Road lights and signaling

SR 800 - 17 WHEEL	SR 800 - 19 WHEEL
10' (3.1 m)	10' (3.1 m)
27' (8.2 m)	29'6" (9.0 m)
17	19
Tapered roller bearings with grease zerk	Tapered roller bearings with grease zerk
N/A	N/A
60" (1.5 m)	60" (1.5 m)
9/32" (7 mm)	9/32" (7 mm)
36 (18 pairs)	36 (18 pairs)
Bolts	Bolts
Hydraulic	Hydraulic
Right and left side independent adjustable spring suspension	Right and left side independent adjustable spring suspension
Optional	Optional
9.5L - 15, 8-ply rating	9.5L - 15, 8-ply rating
12'4" (3.8 m)	12'4" (3.8 m)
-	-
Standard	Standard
4' (1.2 m)	4' (1.2 m)
6' (1.8 m)	6' (1.8 m)
12'4" (3.8 m)	12'4" (3.8 m)
28'3" (8.6 m)	32' (9.8 m)
8'3" (2.5 m)	8'3" (2.5 m)
14" (36 cm)	14" (36 cm)
Standard	Standard
-	-
Standard	Standard
80 hp (60 kW)	80 hp (60 kW)
2 DA	2 DA
Drawbar	Drawbar
6,170 lbs (2,800 kg)	6,574 lbs (2,982 kg)
-	Standard
Standard	Standard

Media

View the gallery in full screen

Available applications: SR 800

KUHN ForageXpert

For a powerful forage harvesting chain. This new application is available to help you find mowers, mower conditioners, tedders and rakes best adapted to your needs. It will help you optimize forage harvesting according to your current or future equipment purchases.

Check all our other KUHN apps to optimize your farm and your life

Commercial Hay & Forage Equipment

Because Every Minute Counts

Learn More

SR 800 Series Wheel Rakes